Jeep Cherokee (KL): Power Mirrors. Power Folding Mirrors. Heated Mirrors

Jeep Cherokee (KL) 2014 - 2023 Owners Manual > Understanding the features of your vehicle > Mirrors > Power Mirrors. Power Folding Mirrors. Heated Mirrors

Power Mirrors

The power mirror switches are located on the driver's door trim panel.

Power Mirror Switches
Power Mirror Switches

1 - Mirror Direction Control

2 - Left And Right Mirror Select

Models With Express Window Feature

Push and release the mirror select button marked L (left) or R (right) and then push one of the four arrow buttons to move the mirror in the direction the arrow is pointing.

The selection will time out after 30 seconds of inactivity to guard against accidentally moving a mirror position following an adjustment.

NOTE: For vehicles equipped with Driver Memory Seat, you can use your Remote Keyless Entry (RKE) transmitter or the memory switch on the instrument panel to return the power mirrors to pre-programmed positions.

Refer to "Driver Memory Seat" in "Understanding The Features Of Your Vehicle" for further information.

Models Without Express Window Feature

Push the mirror select button marked L (left) or R (right) and then push one of the four arrow buttons to move the mirror in the direction the arrow is pointing.

Power Folding Mirrors - If Equipped

The switch for the power folding mirrors is located between the power mirror switches L (left) and R (right).

Push the switch once and the mirrors will fold in, pushing the switch a second time will return the mirrors to the normal driving position.

Power Folding Mirror Switch
Power Folding Mirror Switch

NOTE: If the vehicle speed is greater than 10 mph (16 km/h) the folding feature will be disabled.

If the mirrors are in the folded position, and vehicle speed is equal or greater than 10 mph (16 km/h), they will automatically unfold.

Resetting The Power Folding Outside Mirrors

You may need to reset the power folding mirrors if the following occurs:

  • The mirrors are accidentally blocked while folding.
  • The mirrors are accidentally manually folded/ unfolded.
  • The mirrors come out of the unfolded position.
  • The mirrors shake and vibrate at normal driving speeds.

To reset the power folding mirrors: Fold and unfold them by pushing the button. (this may require multiple button pushes). This resets them to their normal position.

Heated Mirrors - If Equipped

These mirrors are heated to melt frost or ice. This feature can be activated whenever you turn on the rear window defroster (if equipped). Refer to "Rear Window Features" in "Understanding The Features Of Your Vehicle" for further information.

Illuminated Vanity Mirrors - If Equipped

An illuminated vanity mirror is on each sun visor. To use the mirror, rotate the sun visor down and swing the mirror cover upward. The lights will turn on automatically.

Closing the mirror cover will turn off the light.

Illuminated Vanity Mirror
Illuminated Vanity Mirror

Sun Visor "Slide-On-Rod" Feature - If Equipped

The sun visor "Slide-On-Rod" feature allows for additional flexibility in positioning the sun visor to block out the sun.

1. Fold down the sun visor.

2. Unclip the visor from the center clip.

3. Pull the sun visor toward the inside rearview mirror to extend it.

    Previous pageInside Day/Night Mirror. Assist And 9-1-1 Rearview Mirror. Outside Mirrors

    Inside Day/Night Mirror - If Equipped The mirror head can be adjusted up, down, left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window. H ...

    Next pageBlind spot monitoring (bsm)

    The Blind Spot Monitoring (BSM) system uses two radarbased sensors, located inside the rear bumper fascia, to detect highway licensable vehicles (automobiles, trucks, motorcycles, etc.) that enter ...

    Other materials:

    Adjustments
    Brake lamp switch (1) Press and hold brake pedal in applied position. (2) Pull switch plunger all the way out to fully extended position. (3) Release brake pedal. Then pull pedal lightly rearward. Pedal will set plunger to correct position as pedal pushes plunger into switch body. Switch wi ...