Jeep Cherokee (XJ): Vacuum reservoir
DESCRIPTION
The vacuum reservoir is mounted to the front bumper bar behind the passenger side bumper end cap. The bumper end cap must be removed from the vehicle to access the vacuum reservoir for service.
OPERATION
Engine vacuum is stored in the vacuum reservoir.
The stored vacuum is used to operate the vacuumcontrolled vehicle accessories during periods of low engine vacuum such as when the vehicle is climbing a steep grade, or under other high engine load operating conditions.
The vacuum reservoir cannot be repaired and, if faulty or damaged, it must be replaced.
Refrigerant oil. Refrigerant system service port. Vacuum check valve
Other materials:
Camshaft bearings. Crankshaft main bearings. Oil pan
Camshaft bearings
The camshaft rotates within four steel-shelled,
babbitt-lined bearings that are pressed into the cylinder
block and then line reamed. The camshaft
bearing bores and bearing diameters are not the
same size. They are stepped down in 0.254 mm
(0.010 inch) increments from the fron ...